MERCURY ELITE 1200

Features Mercury UPS Elite 1200 Pro:

• Built-in AVR - to withstand voltage fluctuation
• Wide input voltage range
• Overload protection & Short circuit protection
• Battery deep discharge protection & overcharge protection
• Green function (No load cut off)
• Compatible with generators
• Extended powerbackup and durability

For a UPS that can be trusted for [erformance, reliability and durability, the Mercury UPS brand is one of the top choices. The Mercury Elite 1200 Pro Line Interactive UPS is suitable for office and domestic IT equipment and electronics.

Technical Specifications of Mercury UPS Elite 1200 Pro;

Input voltage 220VAC

Input frequency 50Hz

Input phase Single phase

Input socket With Fuse

Cold Start (0 to 100% load) Press the ON/OFF switch

Input range (220V) 140-300

Rating output (VA). 1200VA

Rating output (W). 720W

Waveform Battery mode(simulated sine wave),AC mode(sine wave)

Power factor 0.6

Rating voltage 220V

Output range 220Vac-7% to +15% in battery mode

Rear Output Socket 4 x Universal - Battery backup

Transfer time TYPICAL4-8ms

Communication Interface optional RS232/RJ11

Rating frequency 50Hz

Line-mode Synchronize with the Utility

Battery mode 50 Hz±1Hz

Line Mode FUSE& firmware protection

Battery Mode Software protection controlled by firmware

Line Mode 110%±5%; Go to fault mode after 5 minutes, 120%±5%; Go to fault mode immediately.

Battery Mode 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately

Rating 2 X 12V/7.5AH (Actual rating 7AH)

Backup time - Typical 20 to 30 mins (depending on load)

Charge current About 1A at normal mode.

Over charge protection 29V±0.2V stop charging, 27.4+/-0.2V recharge

Weight 8.6+/-0.3 Kg

Dimensions per unit packaging 395x205x258mm

Packsize per Master carton 2

Dimensions per Master carton 410x430x273mm